Commercial roofing in Fort Worth & Dallas — TPO, PVC, metal and more.

For a business, a roof problem is more than a repair bill. Leaks can damage inventory, equipment, and finishes, interrupt operations, and create safety issues for tenants and customers. RezComm Roofing & Construction provides commercial roofing for building owners and property managers across Dallas–Fort Worth, including TPO, metal, tile, and other low-slope and steep-slope systems.

We start with a FREE AI drone roof scan and a FREE, no-obligation estimate. Drone scans are especially useful on commercial buildings, where large roof areas and multiple levels are slow and costly to cover on foot. You can also get a FREE verified storm history report for your property address.

Signs your commercial roof needs attention

• Ponding water that sits on a low-slope roof long after rain stops. Standing water adds weight and speeds up wear on membranes and seams.
• Open or separating seams on single-ply membranes.
• Blisters, bubbles, or wrinkles in the membrane, which can point to trapped moisture or adhesion problems.
• Punctures and cuts, often from foot traffic around HVAC equipment or from hail.
• Failing flashing at parapet walls, curbs, and penetrations.
• Clogged drains and scuppers, or gutters that overflow.
• Loose fasteners and rust on metal roofs.
• Interior signs like stained ceiling tiles, damp insulation, or water near walls.
• Rising cooling costs, which can come from wet insulation under the roof.

Commercial roofing systems we work with

TPO (thermoplastic polyolefin)

TPO is a single-ply membrane widely used on low-slope commercial roofs. Its seams are heat-welded, which creates a continuous bond between sheets. White TPO reflects a large share of sunlight, which can help reduce heat gain on the building during long North Texas summers. TPO comes in several thicknesses; thicker membranes add durability at a higher cost.

Metal roofing

Metal is common on warehouses, shops, retail, and churches. Standing seam systems hide the fasteners under raised seams, while exposed-fastener panels are more economical but need periodic attention to fasteners and washers. Metal handles wind well and can last for decades. See metal roofing for more.

Concrete and clay tile

Some commercial and multi-family buildings use tile for appearance and durability, especially in office parks and higher-end developments. See tile roofing.

Other low-slope and flat roofs

Many buildings have older flat roof systems or a mix of roof types across different sections. We repair and replace flat and low-slope roofs; see flat roofing for more.

Restore, repair, or replace?

Not every aging commercial roof needs full replacement. Isolated seam failures and flashing problems can often be repaired. When insulation underneath is wet or the membrane has failed widely, replacement is usually the better long-term investment. We give you an honest assessment based on what we find.

How RezComm handles commercial roofing projects

1. We fly it. A drone scan covers the full roof. Our proprietary AI software flags likely damage, and we use thermal imaging with the drone scan to look for wet areas under the membrane, which is often where commercial leaks hide.
2. We walk it. We inspect the roof in person: seams, flashing, curbs, penetrations, drains, edge metal, and the areas around rooftop equipment.
3. We report what we found. You receive photos and a clear explanation of the roof's condition, plus our recommendation.
4. We provide a free written estimate with a defined scope.
5. If there is an insurance claim, we are on the roof when the adjuster is.
6. We plan around your operations. We coordinate access, staging, and work areas with you or your property manager to limit disruption to tenants and customers.
7. We complete the work following the manufacturer's installation requirements, and keep the site clean.
8. Final walk and documentation of the completed work for your records.

North Texas conditions and commercial roofs

• Hail can puncture or bruise membranes and dent metal panels, flashings, and rooftop equipment.
• High winds stress roof edges and corners, where uplift is strongest. Edge metal and perimeter attachment are critical.
• Heat and UV age membranes and sealants. Reflective roof surfaces can help reduce heat load on the building.
• Heavy downpours overwhelm undersized or clogged drains, which can lead to ponding and leaks.

Regular inspections, especially after major storms, help catch damage before it reaches the interior. Our roof inspection process works for commercial buildings as well as homes.

Commercial roofs and insurance claims

Storm damage to commercial roofs is often covered under commercial property policies, but coverage depends on the policy and the insurer's findings. RezComm documents the damage with drone imagery, thermal images, photos, and written reports, provides an estimate, and meets your adjuster on the roof.

RezComm does not negotiate or adjust claims; Texas law reserves that for licensed public adjusters. We never promise approval. Texas law requires policyholders to pay their deductible, and contractors cannot pay or waive it. See storm damage repair for more about the process.

Insurance, licensing, warranty, and financing

• Fully insured with $1,000,000 in general liability coverage through Berkshire Hathaway Direct Insurance Company. We provide a certificate of insurance on request, which many property managers require.
• Licensed general contractor covering our service cities. Texas does not license roofers at the state level.
• 5-year workmanship warranty from RezComm, plus manufacturer product warranties that vary by system.
• Multiple manufacturers, so we can match the system to the building rather than pushing one brand.
• Financing available through Acorn Finance.

What to expect for timing

Commercial schedules depend on roof size, the system chosen, material lead times, access, and weather. Repairs can often be scheduled sooner than full replacements. For replacements, we work with you on phasing and timing to keep the building in operation where possible. If a claim is involved, the insurer's inspection and decision come first. We provide a realistic schedule once the scope is set.

Frequently asked questions

What types of commercial roofs does RezComm work on?

We work on TPO, metal, concrete and clay tile, and other low-slope and flat roof systems, along with steep-slope roofing on commercial and multi-family buildings.

Can thermal imaging find wet insulation under a flat roof?

Thermal imaging can help identify areas where moisture may be trapped under the membrane. We use it alongside our drone scan and confirm findings with a hands-on inspection.

Can you work without shutting down my business?

We plan access, staging, and work areas with you to limit disruption. Some disruption is unavoidable on any roof project, and we will talk through it with you in advance.

Can you provide a certificate of insurance?

Yes. RezComm carries $1,000,000 in general liability coverage through Berkshire Hathaway Direct Insurance Company, and we provide a certificate on request.

Should I repair or replace my commercial roof?

It depends on how widespread the damage is and whether insulation under the roof is wet. Isolated problems are often repairable. We will give you an honest recommendation after inspecting the roof.

Protect your building and your business. Schedule a FREE drone roof scan and estimate for your commercial property. Call 469-249-3221, Monday through Friday 9 to 6 and Saturday 11 to 4.